Bottom
Discharge type of Centrifuge is
the basic type of Centrifuge almost
like Top
Discharge centrifuge for solid liquid
separation. It contains Basket which
is
dynamically balanced in which a
filter bag is placed which retains
the solid within
the Basket. The arrangement for
the discharge of the solid cake
is provided at the
bottom which is done manually. It
is quick discharge thereby saves
on time and
labour. It is a three point suspension
under driven centrifuge.
The main parts
of the Centrifuge are Bearing
and Shaft, Basket, Drive and Brake
BEARING
AND SHAFT :
The Heavy duty bearing is choosed
to withstand vibratory load and
centrifugal
forces duly fitted in bearing
housing . The bearing housing
is so designed and
filled with grease ensuring long
maintenancefree performance. The
shaft is made up
of suitable material and duly
balanced independently without
the basket for higher
accuracy.
BASKET
:
The basket is made up of adequate
thickness so as to withstand the
loads caused
by the centrifugal forces developed
by material in the basket. It
is perforated and
duly balanced. The basket bottom
is made up of Mild Steel and lined
at the
innersurface by Rubber or SS as
required.
DRIVE
:
The drive consists of Motor mounted
at the basket casing driven through
V belt with
provision of the tensioning the
belts. The Centrifuges are fitted
with Mechanical
Clutch pulley at the motor shaft.
BRAKE
:
The Centrifuge are fitted with
external shoe brakes with brake
liners. The brakes are
heavy duty type designed to bring
loaded basket to stop quickly.
MATERIAL
OF CONSTRUCTION :
The Centrifuge Material of Construction
is Carbon Steel, Stainless Steel
and
Rubber lined.
TECHNICAL
SPECIFICATIONS
MODEL
SS-24
SS-36
SS-48
SS-60
Basket
Diameter mm
600
900
1,200
1,500
Depth
mm
300
425
500
500
Max.
Basket Revolution RPM
1,000
1,000
900
800
Filteration
Area Mtrs sq.Area
0.56
1.2
1.88
2.35
Motors
H.P.
3
7.5
15
20
Rated
charge in Basket Ltrs
50
140
280
400
Note:
We reserve the right to change size
and design features.
