MANUAL TOP DISCHARGE CENTRIFUGE
 
 
Manual Top Discharge type of Centrifuge is the basic type of Centrifuge for solid
liquid separation. It contains Basket which is dynamically balanced in which a filter
bag is placed which retains the solid within the Basket. The discharge of the solid
cake is from the top which is done manually.It is a three point suspension under
driven centrifuge.

The main parts of the Centrifuge are Bearing and Shaft, Basket, Drive and Brake

BEARING AND SHAFT :
The Heavy duty bearing is choosed to withstand vibratory load and centrifugal
forces duly fitted in bearing housing . The bearing housing is so designed and
filled with grease ensuring long maintenancefree performance. The shaft is made
up of suitable material and duly balanced independently without the basket
for higher accuracy.
BASKET :
The basket is made up of adequate thickness so as to withstand the loads caused
by the centrifugal forces developed by material in the basket. It is perforated and
duly balanced. The basket bottom is made up of Mild Steel and lined at the
innersurface by Rubber or SS as required.

DRIVE :
The drive consists of Motor mounted at the basket casing driven through V belt with
provision of the tensioning the belts. The Centrifuges are fitted with Mechanical
Clutch pulley at the motor shaft.

BRAKE :
The Centrifuge are fitted with external shoe brakes with brake liners. The brakes are
heavy duty type designed to bring loaded basket to stop quickly.

MATERIAL OF CONSTRUCTION :
The Centrifuge Material of Construction is Carbon Steel, Stainless Steel and
Rubber lined.
TECHNICAL SPECIFICATIONS
MODEL
SS-24
SS-36
SS-48
SS-60
Basket Diameter mm
600
900
1,200
1,500
Depth mm
300
425
500
500
Max. Basket Revolution RPM
1,000
1,000
900
800
Filteration Area Mtrs sq.Area
0.56
1.2
1.88
2.35
Motors H.P.
3
7.5
15
20
Rated charge in Basket Ltrs
50
140
280
400
Note: We reserve the right to change size and design features.